Update 'README.md'

master
M. Stokroos 3 years ago
parent 63d5f60fd0
commit 91697913eb
  1. 33
      README.md

@ -5,38 +5,27 @@ This repository contains Arduino sketches and Arduino libraries maintained by th
## Sketches
**Blinky**
A hello world example used to play along with Git.
*Blinky*: A hello world example used to play along with Git.
#
**Nexus_Omni4WD**
Firmware for the Nexus Omni4WD wheel base for setting the wheel speeds independently. It is used to control the robot under ROS. The Omni4WD wheel controller hardware board #10009 with io-expansion shield is based on the Arduino Duemilanove/ATMEGA328. Take care of this when programming the controller.
*Nexus_Omni4WD*: Firmware for the Nexus Omni4WD wheel base for setting the wheel speeds independently. It is used to control the robot under ROS. The Omni4WD wheel controller hardware board no. 10009 with io-expansion shield is based on the Arduino Duemilanove/ATMEGA328. Take care of this when programming the controller.
![ ](figures/NexusOmni4WD.png "Nexus Omni 4WD")
*sketches/Nexus_Omni4WD.* This folder contains the Arduino sketch of the firmware. The program works as a simple command interpreter for controlling the wheel speeds independently. To compile, use the libraries provided in the *extra/factory_10011.zip* archive.
*sketches/Nexus_Omni4WD*: This folder contains the Arduino sketch of the firmware. The program works as a simple command interpreter for controlling the wheel speeds independently. To compile, use the libraries provided in the *extra/factory_10011.zip* archive.
*extra/carcomm*
*testcarcom.py*. This is a small Python application to test the Nexus_Omni4WD firmware (sketch). The python application sends data packages to set the wheel speeds.
*extra/nexuscontrol*. Script to control the Nexus via a ROS-node.
*testcarcom.py*: This is a small Python application to test the Nexus_Omni4WD firmware (sketch). The python application sends data packages to set the wheel speeds.
**RoFish**
A CPG-based locomotion control example of a robotic fish.
*extra/nexuscontrol*: Script to control the Nexus via a ROS-node.
#
*RoFish*: A CPG-based locomotion control example of a robotic fish.
![ ](figures/animation.gif "Robotic Fish")
**adaptiveFreqOsc**
An adaptive frequency oscillator example with Arduino.
**varDutyT1**
A sketch for varying (modulating) the duty-cycle of the PWM on the UNO-output pins 9 and 10 via the analog A0 input. The PWM frequency and update rate(!) = 15.625kHz. Resolution is 10-bits.
#
*adaptiveFreqOsc*: An adaptive frequency oscillator example with Arduino.
#
*varDutyT1*: A sketch for varying (modulating) the duty-cycle of the PWM on the UNO-output pins 9 and 10 via the analog A0 input. The PWM frequency and update rate(!) = 15.625kHz. Resolution is 10-bits.
## Libraries
Currently there are no libraries available.

Loading…
Cancel
Save