This repository contains Arduino sketches and Arduino libraries maintained by the RUG/DTPA group.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
M. Stokroos 91697913eb Update 'README.md' 3 years ago
extra added RoFish and adaptiveFreqOsc sketches 4 years ago
figures added robotic fish picture 4 years ago
sketches added example varDutyT1 3 years ago
LICENSE Update 'LICENSE' 4 years ago
README.md Update 'README.md' 3 years ago

README.md

Arduino

This repository contains Arduino sketches and Arduino libraries maintained by the RUG/DTPA group.

Sketches

Blinky: A hello world example used to play along with Git.

Nexus_Omni4WD: Firmware for the Nexus Omni4WD wheel base for setting the wheel speeds independently. It is used to control the robot under ROS. The Omni4WD wheel controller hardware board no. 10009 with io-expansion shield is based on the Arduino Duemilanove/ATMEGA328. Take care of this when programming the controller.

sketches/Nexus_Omni4WD: This folder contains the Arduino sketch of the firmware. The program works as a simple command interpreter for controlling the wheel speeds independently. To compile, use the libraries provided in the extra/factory_10011.zip archive.

extra/carcomm

testcarcom.py: This is a small Python application to test the Nexus_Omni4WD firmware (sketch). The python application sends data packages to set the wheel speeds.

extra/nexuscontrol: Script to control the Nexus via a ROS-node.

RoFish: A CPG-based locomotion control example of a robotic fish.

adaptiveFreqOsc: An adaptive frequency oscillator example with Arduino.

varDutyT1: A sketch for varying (modulating) the duty-cycle of the PWM on the UNO-output pins 9 and 10 via the analog A0 input. The PWM frequency and update rate(!) = 15.625kHz. Resolution is 10-bits.

Libraries

Currently there are no libraries available.